D-Link DES-3250TG Command Line Interface Reference Manual - page 99
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
99
create snmp host
Encryption
− scrambles the contents of
messages to prevent it being seen by an
unauthorized source.
noauth_nopriv
− Specifies that there will be no
authorization and no encryption of packets sent
between the switch and a remote SNMP
manager.
auth_nopriv
− Specifies that authorization will be
required, but there will be no encryption of
packets sent between the switch and a remote
SNMP manager.
auth_priv
− Specifies that authorization will be
required, and that packets sent between the
swtich and a remote SNMP manger will be
encrypted.
− An alphanumeric string used
to authorize a remote SNMP manager to access
the switch’s SNMP agent.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To create an SNMP host to receive SNMP messages:
local>create snmp host 10.48.74.100 v3 auth_priv public
Command: create snmp host 10.48.74.100 v3 auth_priv public
Success.
local>