D-Link DES-3250TG Command Line Interface Reference Manual - page 227
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
227
show ipif
Purpose
Used to display the configuration of an IP
interface on the switch.
Syntax
show ipif
Description
This command will display the configuration of
an IP interface on the switch.
Parameters none.
Restrictions none.
Example Usage:
To display IP interface settings:
local>show ipif
Command: show ipif
IP Interface Settings
Interface Name : System
IP Address : 10.90.90.90 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Member Ports : 1-50
Total Entries : 1
local>