D-Link DES-3250TG Command Line Interface Reference Manual - page 88
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
88
create snmp community
Purpose
Used to create an SNMP community string to
define the relationship between the SNMP
manager and an agent. The community string
acts like a password to permit access to the
agent on the switch. One or more of the
following characteristics can be associated with
the community string:
An Access List of IP addresses of SNMP
managers that are permitted to use the
community string to gain access to the switch’s
SNMP agent.
An MIB view that defines the subset of all MIB
objects that will be accessible to the SNMP
community.
Read|write or read-only level permission for the
MIB objects accessible to the SNMP
community.
Syntax
create snmp community
32> view
[read_only|read_write]
Description
The create snmp community command is used
to create an SNMP community string and to
assign access-limiting characteristics to this
community string.
Parameters
− An alphanumeric
string of up to 32 characters that is used to
identify members of an SNMP community. This
string is used like a password to give remote
SNMP managers access to MIB objects in the
switch’s SNMP agent.
− An alphanumeric string of
up to 32 characters that is used to identify the