D-Link DES-3250TG Command Line Interface Reference Manual - page 143
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
143
show stp
Purpose
Used to display the switch’s current STP
configuration.
Syntax
show stp
Description
This command displays the switch’s current
STP configuration.
Parameters none
Restrictions none.
Example Usage:
To display the status of STP on the switch:
Status 1: STP Enabled
local>show stp
Command: show stp
STP Status : Enabled
Max Age : 20
Hello Time : 2
Forward Delay : 15
Priority : 32768
STP Version : RSTP
TX Hold Count : 3
Forwarding BPDU : Enabled
Designated Root Bridge: 00-80-00-00-01-02