D-Link DES-3250TG Command Line Interface Reference Manual - page 283
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
283
config access_profile
add access_id
− Adds an
additional rule to the above specified access
profile. The value specifies the relative priority
of the additional rule. A lower access ID, the
higher the priority the rule will be given.
ethernet
− Specifies that the switch will look only
into the layer 2 part of each packet.
vlan
− Specifies that the
access profile will apply to only to this VLAN.
source_mac
− Specifies that the
access profile will apply to only packets with this
source MAC address.
destination_mac
− Specifies that the
access profile will apply to only packets with this
destination MAC address.
802.1p
− Specifies that the access
profile will apply only to packets with this 802.1p
priority value.
ethernet_type
− Specifies that
the access profile will apply only to packets with
this hexidecimal 802.1Q Ethernet type value in
the packet header.
ip
− Specifies that the switch will look into the IP
fields in each packet.
vlan
− Specifies that the
access profile will apply to only to this VLAN.
source_ip
− Specifies that the access
profile will apply to only packets with this source
IP address.
destination_id
− Specifies that
the access profile will apply to only packets with
this destination IP address.