D-Link DES-3250TG Command Line Interface Reference Manual - page 73
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
73
disable snmp traps
Purpose
Used to disable SNMP trap support on the
switch.
Syntax
enable snmp traps
Description
This command is used to disable SNMP trap
support on the switch.
Parameters none.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To prevent SNMP traps from being sent from the switch:
local>disable snmp traps
Command: disable snmp traps
Success.
local>