D-Link DES-3250TG Command Line Interface Reference Manual - page 74
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
74
enable snmp authenticate traps
Purpose
Used to enable SNMP authentication trap
support.
Syntax
enable snmp authenticate traps
Description
This command is used to enable SNMP
authentication trap support on the switch.
Parameters none.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To turn on SNMP authentication trap support:
local>enable snmp authenticate traps
Command: enable snmp authenticate traps
Success.
local>