D-Link DES-3250TG Command Line Interface Reference Manual - page 92
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
92
config snmp engineID
Purpose
Used to configure a name for the SNMP engine
on the switch.
Syntax
config snmp engineID
Description
The config snmp engineIDcommand configures
a name for the SNMP engine on the switch.
Parameters
− An alphanumeric string
that will be used to identify the SNMP engine on
the switch.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To give the SNMP agent on the switch the name “0035636666:”
local>config snmp 0035636666
Command: config snmp engineID 0035636666
Success.
local>