D-Link DES-3250TG Command Line Interface Reference Manual - page 267
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
267
Example Usage:
To configure Radius server communication settings:
local>config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
local>
config radius delete
Purpose
Used to delete a previously entered Radius
server configuration.
Syntax
config radius delete
Description
The config radius delete command is used
to delete a previously entered Radius server
configuration.
Parameters
the current set of Radius server settings.
Up to three groups of Radius server
settings can be entered on the switch.
Restrictions
Only administrator-level users can issue
this command.