D-Link DES-3250TG Command Line Interface Reference Manual - page 67
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
67
enable rmon
Purpose
Used to enable RMON on the switch.
Syntax
enable rmon
Description
This command is used, in conjunction with the
disable RMONcommand below, to enable and
disable remote monitoring (RMON) on the
switch.
Parameters none.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To enable RMON:
local>enable rmon
Command: enable rmon
Success.
local>