D-Link DES-3250TG Command Line Interface Reference Manual - page 180
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
180
show traffic_segmentation
Purpose
Used to display the current traffic segmentation
configuration on the switch.
Syntax
show traffic_segmentation
Description
The show traffic_segmentationcommand is used
to display the current traffic segmentation
configuration on the switch.
Parameters
− Specifies a range of ports for which
the current traffic segmentation configuration on
the switch will be displayed. The port list is
specified by listing the beginning port number
and the highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4specifies all
of the ports between port 3 and port 4
− in
numerical order.
Restrictions None.
Example Usage:
To display the current traffic segmentation configuration on the switch:
local> show traffic_segmentation
Command: show traffic_segmentation
Traffic Segmentation Table
Port Forward Portlist
---- ------------------------------------------------
1 9-15