D-Link DES-3250TG Command Line Interface Reference Manual - page 251
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
251
show 802.1x auth_configuration
between successive re-authentications.
ReAuthenticate: Enabled|Disabled
− Shows
whether or not to re-authenticate.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To display 802.1x authentication configuration port settings for port 1:
local>show 802.1x auth_configuration
Command: show 802.1x auth_configuration
802.1X : Disabled
Authentication Mode : None
Authentication Protocol : Radius_Eap
Port number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60 sec
TxPeriod : 30 sec
SuppTimeout : 30 sec
ServerTimeout : 30 sec
MaxReq : 2 times
ReAuthPeriod : 3600 sec
ReAuthenticate : Disabled