D-Link DES-3250TG Command Line Interface Reference Manual - page 258
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
258
config 802.1x auth_parameter
receiving and transmitting directions, or just the
receiving direction.
port_control
− Configures the administrative
control over the authentication process for the
range of ports.
force_auth
− Forces the Authenticator for the
port to become authorized. Network access is
allowed.
auto
− Allows the port’s status to reflect the
outcome of the authentication process.
force_unauth
− Forces the Authenticator for the
port to become unauthorized. Network access
will be blocked.
quiet_period
− Configures the
time interval between authentication failure and
the start of a new authenticaiton attempt.
max_req
− Configures the number
of times to retry sending packets to a supplicant
(user).
reauth_period
− Configures the
time interval between successive re-
authentications.
enable_reauth [enabled|disabled]
− Determines
whether or not the switch will re-authenticate.
Enabled causes re-authentication of users at
the time interval specified in the Re-
authentication Period field, above.
Restrictions Only
administrator-level users can issue this
command.