D-Link DES-3250TG Command Line Interface Reference Manual - page 164
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
164
show traffic control
Purpose
Used to display current traffic control settings.
Syntax
show traffic control
Description
This command displays the current storm traffic
control configuration on the switch.
Parameters
group_list
− Used to
specify a broadcast storm control group with the
syntax: module_id:group_id.
Restrictions none.
Example Usage:
To display traffic control setting:
local>show traffic control
Command: show traffic control
Traffic Control
Broadcast Multicast Destination
Group [ports] Threshold Storm Storm Lookup Fail
------ ------------- --------- --------- --------- -----------
1 [ 1 - 8 ] 128 Enabled Disabled Disabled
2 [ 9 - 16] 128 Enabled Disabled Disabled
3 [17 - 24] 128 Enabled Disabled Disabled
4 [25 - 32] 128 Disabled Disabled Disabled
5 [33 - 40] 128 Disabled Disabled Disabled
6 [41 - 48] 128 Enabled Disabled Disabled
7 [ 49 ] 128 Enabled Disabled Disabled
8 [ 50 ] 128 Disabled Disabled Disabled
Total Entries: 8