D-Link DES-3250TG Command Line Interface Reference Manual - page 289
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
289
create iproute
Purpose
Used to create an IP route entry to the switch’s
IP routing table.
Syntax
create iproute default
65535>}
Description
This command is used to create an IP route
entry to the switch’s IP routing table.
Parameters
default
− creates a default IP route entry.
− The IP address for the next hop
router.
− The default setting is 1.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To create an IP route for the routing table:
local>create iproute default 10.1.1.5
Command: create iproute default 10.1.1.5
Success.
local>