D-Link DES-3250TG Command Line Interface Reference Manual - page 194
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
194
create vlan
Purpose
Used to create a VLAN on the switch.
Syntax
create vlan
Description
This command allows you to create a VLAN on
the switch.
Parameters
− The name of the VLAN to be
created.
− The VLAN ID of the VLAN to be
created.
advertisement
− Specifies the VLAN as able to
join GVRP. If this parameter is not set, the
VLAN cannot be configured to have forbidden
ports.
Restrictions
Each VLAN name can be up to 32 characters.
If the VLAN is not given a tag, it will be a port-
based VLAN. Only administrator-level users can
issue this command.
Example Usage:
To create a VLAN v1, tag 2:
local>create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
local>