D-Link DES-3250TG Command Line Interface Reference Manual - page 290
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
290
delete iproute default
Purpose
Used to delete an IP route entry from the switch’s
IP routing table.
Syntax
delete iproute default
Description
This command will delete an existing entry from
the switch’s IP routing table.
Parameters
default
− deletes a default IP route entry.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To delete the default IP route from the switch’s routing table:
local>delete iproute default
Command: delete iproute default
Success.
local>