D-Link DES-3250TG Command Line Interface Reference Manual - page 237
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
237
enable igmp_snooping
Purpose
Used to enable IGMP snooping on the switch.
Syntax
enable igmp_snooping {forward-mcrouter-
only}
Description
This command allows you to enable IGMP
snooping on the switch. If forward-mcrouter-
only is specified, the switch will forward all
multicast traffic to the multicast router, only.
Otherwise, the switch forwards all mulitcast
traffic to any IP router.
Parameters
forward_mcrouter_only
− Specifies that the
switch should forward all multicast traffic to a
multicast-enabled router only. Otherwise, the
switch will forward all multicast traffic to any IP
router.
Restrictions Only
administrator-level users can issue this
command.
Example usage:
To enable IGMP snooping on the switch:
local>enable igmp_snooping
Command: enable igmp_snooping
Success.
local>