D-Link DES-3250TG Command Line Interface Reference Manual - page 198
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
198
config vlan delete
Purpose
Used to delete one or more ports from a
previously configured VLAN.
Syntax
config vlan
Description
This command allows you to delete ports from a
previously configured VLAN’s port list.
Parameters
− The name of the VLAN you
want to delete ports from.
− A range of ports you want to delete
from the above specified VLAN. The port list is
specified by listing the beginning port number
and the highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4specifies
all of the ports between port 3 and port 4
− in
numerical order.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To delete 4 through 8 to the VLAN v1:
local>config vlan v1 delete 4-8
Command: config vlan v1 delete 4-8
Success.
local>