D-Link DES-3250TG Command Line Interface Reference Manual - Etwork
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
60
7
N
ETWORK
M
ANAGEMENT
C
OMMANDS
The network management commands in the Command Line Interface
(CLI) are listed (along with the appropriate parameters) in the following
table.
The DES-3250TG supports the Simple Network Management Protocol
(SNMP) versions 1, 2c, and 3. You can specifiy which version of the
SNMP you want to use to monitor and control the switch. The three
versions of SNMP vary in the level of security provided between the
management station and the network device. The following table lists
the security features of the three SNMP versions:
SNMP
Version
Authentication
Method
Description
v1 Community
String
Community String is used for
authentication − NoAuthNoPriv
v2c Community
String
Community String is used for
authentication − NoAuthNoPriv
v3 Username
Username is used for
authentication − NoAuthNoPriv
v3
MD5 or SHA
Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthNoPriv