D-Link DES-3250TG Command Line Interface Reference Manual - page 137
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
137
config stp
number of Hello packets transmitted per
interval. Default value = 3.
version [rstp|stp] – select the Spanning Tree
Protocol version used for the switch. For IEEE
802.1d STP select stp. Select rstp for IEEE
802.1w Rapid STP.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To configure STP with maxage 18 and hellotime 4:
local>config stp maxage 18 hellotime 4
Command: config stp maxage 18 hellotime 4
Success.
local>