D-Link DES-3250TG Command Line Interface Reference Manual - page 18
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
18
• VT-100 compatible
• 9,600 baud
• 8 data bits
• No parity
• One stop bit
• No flow control
You can also access the same functions over a Telnet interface. Once
you have set an IP address for your Switch, you can use a Telnet
program (in VT-100 compatible terminal mode) to access and control
the Switch. All of the screens are identical, whether accessed from the
console port or from a Telnet interface.
After the switch reboots and you have logged in, the console looks like
this:
Figure 2-1. Initial Console Screen