D-Link DES-3250TG Command Line Interface Reference Manual - page 64
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
64
config snmp system_name
Purpose
Used to configure a name for the switch.
Syntax
config snmp system_name
Description
This command is used to give the switch an
alpha-numeric name of up to 255 characters.
Parameters
− An alpha-numeric name for the
switch of up to 255 characters.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To configure the switch name for “DES-3250”:
local>config snmp system_name DES3250
Command: config snmp system_name DES3250
Success.
local>