D-Link DES-3250TG Command Line Interface Reference Manual - page 162
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
162
config traffic control
Purpose
Used to configure broadcast|multicast traffic
control.
Syntax
config traffic control [
8>|all] broadcast
[enabled|disabled]|multicast
[enabled|disabled]|dlf
[enabled|disabled]|threshold
Description
This command is used to configure broadcast
storm control.
Parameters
− Used to specify a
broadcast storm control group with the syntax:
module_id:group_id.
all
− Specifies all broadcast storm control
groups on the switch.
broadcast [enabled|disabled]
− Enables or
disables broadcast storm control.
multicast [enabled|disabled]
− Enables or
disables multicast storm control.
dlf [enabled|disabled]
− Enables or disables dlf
traffic control.
threshold
− The upper threshold
at which the specified traffic control is switched
on. The
broadcast|multicast|dlf packets, in Kbps,
received by the switch that will trigger the storm
traffic control measures.
Restrictions Only
administrator-level users can issue this
command.