D-Link DES-3250TG Command Line Interface Reference Manual - page 45
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
45
save
Purpose
Used to save changes in the switch’s
configuration to non-volatile RAM.
Syntax
save
Description
This command is used to enter the current
switch configuration into non-volatile RAM. The
saved switch configuration will be loaded into
the switch’s memory each time the switch is
restarted.
Parameters none.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To save the switch’s current configuration to non-volatile RAM:
local>save
Command: save
Saving all settings to NV-RAM... 100%
done.
local>