D-Link DES-3250TG Command Line Interface Reference Manual - page 16
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
16
address to be assigned to the IP interface named System
and the z represents the corresponding number of subnets
in CIDR notation.
The IP interface named System on the switch can be assigned an IP
address and subnet mask which can then be used to connect a
management station to the switch’s Telnet or Web-based management
agent.
Figure 1-3. Assigning the Switch an IP Address
In the above example, the switch was assigned an IP address of
10.24.22.5 with a subnet mask of 255.0.0.0. The system message
Success indicates that the command was executed successfully. The
switch can now be configured and managed via Telnet and the CLI or
via the Web-based management agent using the above IP address to
connect to the switch.