D-Link DES-3250TG Command Line Interface Reference Manual - page 209
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
209
enable asymmetric_vlan
Purpose
Used to enable Asymmetric VLANs system
wide.
Syntax
enable asymmetric_vlan
Description
This command enables Asymmetric VLANs
system wide. A unique PVID is assigned to all
ports creating a separate VLAN for each port.
Each port is still able to receive frames from the
defult VLAN. Asymmetric VLANs are disabled
by default.
Parameters None.
Restrictions Only
administrator-level users can issue this
command.
Example usage:
To enable Asymmetric VLANs:
local>enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
local>