D-Link DES-3250TG Command Line Interface Reference Manual - page 196
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
196
config vlan add
Purpose
Used to add additional ports to a previously
configured VLAN.
Syntax
config vlan
[tagged|untagged|forbidden]
Description
This command allows you to add ports to the
port list of a previously configured VLAN. You
can specify the additional ports as tagging,
untagging, or forbidden. The default is to assign
the ports as untagging.
Parameters
− The name of the VLAN you
want to add ports to.
tagged
− Specifies the additional ports as
tagged.
untagged
− Specifies the additional ports as
untagged.
forbidden
− Specifies the additional ports as
forbidden.
− A range of ports to add to the VLAN.
The port list is specified by listing the beginning
port number and the highest port number of the
range. The beginning and end of the port list
range are separated by a dash. For example, 3
would specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and port
4
− in numerical order.
Restrictions Only
administrator-level users can issue this
command.