D-Link DES-3250TG Command Line Interface Reference Manual - page 97
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
97
delete snmp group
Purpose
Used to remove an SNMP group from the
switch.
Syntax
delete snmp group
Description
The delete snmp groupcommand is used to
remove an SNMP group from the switch.
Parameters
− An alphanumeric name of
up to 32 characters that will identify the SNMP
group the new SNMP user will be associated
with.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To delete the SNMP group named “sg1”.
local>delete snmp group sg1
Command: delete snmp group sg1
Success.
local>