D-Link DES-3250TG Command Line Interface Reference Manual - page 91
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
91
show snmp community
Purpose
Used to display SNMP community strings
configured on the switch.
Syntax
show snmp community {
32>}
Description
The show snmp community command is used to
display SNMP community strings that are
configured on the switch.
Parameters
− An alphanumeric
string of up to 32 characters that is used to
identify members of an SNMP community. This
string is used like a password to give remote
SNMP managers access to MIB objects in the
switch’s SNMP agent.
Restrictions None.
Example Usage:
To display the currently entered SNMP community strings:
local>show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
-------------------------------- -------------------------------- ------------
dlink ReadView read_write
private CommunityView read_write
public CommunityView read_only
Total Entries: 3
local>