D-Link DES-3250TG Command Line Interface Reference Manual - page 150
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
150
create fdb
Purpose
Used to create a static entry to the unicast MAC
address forwarding table (database)
Syntax
create fdb
Description
This command will make an entry into the
switch’s unicast MAC address forwarding
database.
Parameters
− The name of the VLAN on
which the MAC address resides.
− The MAC address that will be
added to the forwarding table.
− The port number corresponding to the
MAC destination address. The switch will
always forward traffic to the specified device
through this port.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To create an unicast MAC forwarding:
local>create fdb default 00-00-00-00-01-02 port 5
Command: create fdb default 00-00-00-00-01-02 port 5
Success.
local>