D-Link DES-3250TG Command Line Interface Reference Manual - page 296
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
296
show sntp
Purpose
Used to show SNTP on the switch.
Syntax
show sntp
Description
This command will show SNTP on the switch.
Parameters None.
Restrictions None.
Example Usage:
To show SNTP on the switch:
local>show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.24.22.5
SNTP Secondary Server : 0.0.0.0
SNTP poll interval : 720 sec
local>