D-Link DES-3250TG Command Line Interface Reference Manual - page 85
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
85
delete snmp view
Purpose
Used to remove an SNMP view entry previously
created on the switch.
Syntax
delete snmp view
[all|
Description
The delete snmp view command is used to
remove an SNMP view previously created on
the switch.
Parameters
− An alphanumeric string of
up to 32 characters that identifies the SNMP
view to be deleted.
all
− Specifies that all of the SNMP views on the
switch will be deleted.
− The object ID that identifies an object
tree (MIB tree) that will be deleted from the
switch.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To delete a previously configured SNMP view from the switch:
local>delete snmp view dlinkview
Command: delete snmp view dlinkview
Success.
local>