D-Link DES-3250TG Command Line Interface Reference Manual - page 79
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
79
create snmp user
sha – The HMAC-SHA-96 authentication level.
− An alphanumeric sting
of between 8 and 20 characters that will be
used to authorize the agent to receive packets
for the host.
− An alphanumeric string
of between 8 and 16 characters that will be
used to encrypt the contents of messages the
host sends to the agent.
MD5 or SHA1, it is hex string type.
hex string type.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To create an SNMP user on the switch:
local>create snmp user dlink default encrypted by_password
auth md5 auth_password none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password none
Success.
local>