D-Link DES-3250TG Command Line Interface Reference Manual - page 279
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
279
create access_profile
igmp
− Specifies that the switch will examine
each frame’s Internet Group Management
Protocol (IGMP) field.
type
− Specifies that the switch will examine
each frame’s IGMP Type field.
tcp
− Specifies that the switch will examine each
frames Transport Control Protocol (TCP) field.
src_port_mask
− Specifies a
TCP port mask for the source port.
dst_port_mask
− Specifies a
TCP port mask for the destination port.
udp
− Specifies that the switch will examine
each frame’s Universal Datagram Protocol
(UDP) field.
src_port_mask
− Specifies a
UDP port mask for the source port.
dst_port_mask
− Specifies a
UDP port mask for the destination port.
protocol_id
− Specifies that the switch will
examine each frame’s Protocol ID field.
user_mask
− Specifies that
the rule applies to the IP protocol ID and the
mask options behind the IP header.
permit
− Specifies that packets that match the
access profile are permitted to be forwarded by
the switch.
deny
− Specifies that packets that do not match
the access profile are not permitted to be
forwarded by the switch and will be filtered.
profile_id
− Specifies an index
number that will identify the access profile being
created with this command.