D-Link DES-3250TG Command Line Interface Reference Manual - page 86
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
86
show snmp view
Purpose
Used to display an SNMP view previously
created on the switch.
Syntax
show snmp view {
Description
The show snmp viewcommand displays an
SNMP view previously created on the switch.
Parameters
− An alphanumeric string of
up to 32 characters that identifies the SNMP
view that will be displayed.
Restrictions None.
Example Usage:
To show SNMP view:
local>show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
ReadView 1 Included
WriteView 1 Included
NotifyView 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included