D-Link DES-3250TG Command Line Interface Reference Manual - page 72
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
72
enable snmp traps
Purpose
Used to enable SNMP trap support.
Syntax
enable snmp traps
Description
This command is used to enable SNMP trap
support on the switch.
Parameters none.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To turn on SNMP trap support:
local>enable snmp traps
Command: enable snmp traps
Success.
local>