D-Link DES-3250TG Command Line Interface Reference Manual - page 219
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
219
config link_aggregation algorithm
Purpose
Used to configure the link aggregation algorithm.
Syntax
config link_aggregation algorithm
[mac_source|mac_destination|mac_source_dest|
ip_source|ip_destination|ip_source_dest]
Description
This command configures to part of the packet
examined by the switch when selecting the egress
port for transmitting load-sharing data. This feature is
only available using the address-based load-sharing
algorithm.
Parameters
mac_source
− Indicates that the switch should
examine the MAC source address.
mac_destination
− Indicates that the switch should
examin the MAC destination address.
mac_source_dest
− Indicates that the switch should
examine the MAC source and ddestination
addresses
ip_source
− Indicates that the switch should examine
the IP source address.
ip_destination
− Indicates that the switch should
examine the IP destination address.
ip_source_dest
− Indicates that the switch should
examine the IP source address and the destination
address.
Restrictions Only
administrator-level users can issue this
command.