D-Link DES-3250TG Command Line Interface Reference Manual - page 282
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
282
config access_profile
Purpose
Used to configure an access profile on the
switch and to define specific values that will be
used to by the switch to determine if a given
packet should be forwarded or filtered. Masks
entered using the create access_profile
command will be combined, using a logical AND
operation, with the values the switch finds in the
specified frame header fields. Specific values
for the rules are entered using the config
access_profile command, below.
Syntax
config access_profile profile_id
255> [add access_id
{vlan
code
255>}|tcp {src_port
65535>|dst_port
65535>}|protocol_id
{user_define
Description
The config access_profilecommand is used to
configure an access profile on the switch and to
enter specific values that will be combined,
using a logical AND operation, with masks
entered with the create access_profile
command, above.
Parameters
profile_id
−