D-Link DES-3250TG Command Line Interface Reference Manual - page 156
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
156
show multicast_fdb
Purpose
Used to display the contents of the switch’s
multicast forwarding database.
Syntax
show multicast_fdb [vlan
32>|mac_address
Description
This command is used to display the current
contents of the switch’s multicast MAC address
forwarding database.
Parameters
− The name of the VLAN on
which the MAC address resides.
− The MAC address that will be
added to the forwarding table.
Restrictions none.
Example Usage:
To display multicast MAC address table:
local>show multicast_fdb
Command: show multicast_fdb
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5, 26
Mode : Static
Total Entries : 1
local>