D-Link DES-3250TG Command Line Interface Reference Manual - page 141
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
141
enable stp
Purpose
Used to globally enable STP on the switch.
Syntax
enable stp
Description
This command allows the Spanning Tree
Protocol to be globally enabled on the switch.
Parameters none.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To enable STP, globally, on the switch:
local>enable stp
Command: enable stp
Success.
local>