D-Link DES-3250TG Command Line Interface Reference Manual - page 291
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
291
show iproute
Purpose
Used to display the switch’s current IP routing
table.
Syntax
show iproute
Description
This command will display the switch’s current
IP routing table.
Parameters None.
Restrictions None.
Example Usage:
To display the contents of the IP routing table:
local>show iproute
Command: show iproute
Routing Table
IP Address|Netmask Gateway Interface Hops Protocol
---------------------------- --------------- --------------- ------------ -------------
10.0.0.0|8 0.0.0.0 System 1 Local
Total Entries : 1
local>