D-Link DES-3250TG Command Line Interface Reference Manual - page 178
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
178
config traffic_segmentation
Purpose
Used to configure traffic segmentation on the
switch.
Syntax
config traffic_segmentation
forward_list [null|
Description
The config traffic_segmentationcommand is
used to configure traffic segmentation on the
switch.
Parameters
− Specifies a range of ports that will be
configured for traffic segmentation. The port list
is specified by listing the beginning port number
and the highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3would
specify port 3. 4 specifies port 4. 3-4specifies all
of the ports between port 3 and port 4
− in
numerical order.
forward_list
− Specifies a range of ports that will
receive forwarded frames from the ports
specified in the portlist above.
null
− Specifies that packets cannot be forwarded
to any ports.
− Specifies a range of ports that will be
configured for traffic segmentation. The port list
is specified by listing the beginning port number
and the highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4specifies all
of the ports between port 3 and port 4
− in
numerical order.
Restrictions Only
administrator-level users can issue this
command.