D-Link DES-3250TG Command Line Interface Reference Manual - page 78
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
78
create snmp user
Purpose
Used to create a new SNMP user and adds the
user to an SNMP group that is also created by
this command.
Syntax
create snmp user
[by_password(1) auth[md5(2)
[md5(2)
40-40>]priv [none(1) |des(2)
]]}
Description
The create snmp user command creates a new
SNMP user and adds the user to an SNMP
group that is also created by this command.
Parameters
− An alphanumeric name of up
to 32 characters that will identify the new SNMP
user.
− An alphanumeric name of
up to 32 characters that will identify the SNMP
group the new SNMP user will be associated
with.
encrypted – Specifies that the password will be
in an encrypted format.
by_password – Indicate input password for
authentication and privacy.
by_key – Indicate input key for authentication
and privacy.
auth – Initiates an authentication level setting
session. The options are MD5 and SHA.
md5 – The HMAC-MD5-96 authentication level.