D-Link DES-3250TG Command Line Interface Reference Manual - page 287
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
287
show access_profile
Purpose
Used to display the currently configured access
profiles on the switch.
Syntax
show access_profile
Description
The show access_profile command is used to
display the currently configured access profiles
Parameters None.
Restrictions Only
administrator-level users can issue this
command.
Example Usage:
To display all of the currently configured access profiles on the switch:
local>
Access Profile Table
Access Profile ID:1 Mode : Deny
TYPE : IP
====================================================
MASK Option Source IP MASK
255.255.255.0
-------------------- ----------------------
Access ID
-------------------- ----------------------
1 10.42.73.0
local>