Qlogic 3200 Series User Manual - -Ha
6–Fibre Channel Noninteractive Commands
-ha (Adapter Alias [FCoE Configuration])
SN0054667-00 G
6-17
scli -l
Displays all LUNs information of a device attached on an HBA port.
scli -l
Displays a specific LUN information of a target device attached on an HBA port.
scli -l
Options
-ha
(Adapter Alias [FCoE Configuration])
With this command you can view, set or delete the alias of a specific adapter.
To view the alias of a specified adapter, issue the following command:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) view | info
To set an alias for a specified adapter, issue the following command:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) <alias>
To delete an alias of a specified adapter, issue the following command:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) delete
Where:
-i
(FC Adapter Information; FC VPD Information)
To show general adapter information or VPD information for all adapter ports in
the system, issue the -i command as follows:
# qaucli -pr fc -i [all] [VPD]
NOTE
To view the current version information for QConvergeConsole CLI, issue
the -v command as described in
hba instance = Adapter number (use the -g command to find)
hba wwpn = World wide port name of the adapter
alias = Symbolic adapter name (100 characters, maximum)