Qlogic 3200 Series User Manual - Adapter Information
9–NIC Interactive Commands
Adapter Information
9-2
SN0054667-00 G
Adapter Information
1. Adapter Information1. Converged Network Adapter
From the main menu, select the Adapter Information option, and then select the
adapter type (Converged Network Adapter). The Converged Network Adapter
Information menu presents options for viewing information about the adapter,
ports, and VPDs. For example:
Adapter Type Selection
1: Converged Network Adapter
2: Fibre Channel Adapter
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Converged Network Adapter Information
1: CNA Adapter Information
2: CNA Port Information
3: CNA VPD Information
CNA Adapter Information (-icna)
1. Adapter Information1. Converged Network Adapter1. CNA Adapter Information
From the Converged Network Adapter Information menu, select the CNA Adapter
Information option. From the adapter menu, select the adapter (CNA Model) for
which to view information for the selected adapter. For example:
CNA Adapter Information
1: CNA Model: QLE3242 SN: AFE1030C04339
Port 1 [Protocol(s): NIC]
Port 2 [Protocol(s): NIC]
NOTE
For interactive commands that have an equivalent noninteractive command
line option, the noninteractive command is shown in parentheses following
the interactive command. For example, the CNA Adapter Information
command described in this chapter has an equivalent -icna command
line option described in
Chapter
.
Some interactive commands have no noninteractive menu command
equivalents.