Qlogic 3200 Series User Manual - -Cna
6–Fibre Channel Noninteractive Commands
-c (Display HBA Parameters)
6-8
SN0054667-00 G
-c
(Display HBA Parameters)
Use the -c command to show the parameter settings for all adapters in the
system:
# qaucli -pr fc -c [
To show the parameter settings for a specific adapter, issue the following command:
# qaucli -pr fc -c (<hba instance> | <hba wwpn>)
Where:
-cna
(CNA FCoE Information)
Use the -cna command to work with QLogic Converged Network Adapters
(QLE81xx and QLE82xx).
The -cna command line options use the following variables:
To view general information for the Converged Network Adapter, issue the
following command:
qaucli -cna <hba instance>|<hba wwpn> --geninfo
To view data center bridging exchange protocol (DCBX) settings, issue the
following command:
qaucli -cna <hba instance>|<hba wwpn> --dcb --info
NOTE
The QLE8242 does not support the option to save the FCode to a file type.
hba instance = Adapter number (use the -g command to find)
hba wwpn = World wide port name of the adapter
hba instance = Adapter instance number of a Converged Network Adapter port
hba wwpn = World wide port name of a Converged Network Adapter port
mpi file = MPI configuration DAT file
--detail = View detailed format
--raw = View raw format
param name = Parameter name
param alias = Parameter alias
param value = Parameter value