Qlogic 3200 Series User Manual - page 290
11–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
11-56
SN0054667-00 G
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Port Link Settings Menu
2: Edit Configured Port Settings Menu
3: Port Restore Factory Defaults
4: BIOS/UEFI Settings Menu
5: Refresh
Port Link Settings Menu
2. Adapter Configuration1. CNA Configuration2. CNA iSCSI Configuration2. Port
Configuration
From the Port Link Configuration menu, select the Port Link Settings Menu
option to open the Port Link Settings Menu with options to display the active link
configuration, display the configured link configuration, and save changes. For
example:
Port Link Settings Menu
=======================================================
CNA : 0 Port: 2
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EE.5
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EE
IPv4 Address : 192.168.1.45
=======================================================
1: Display Active Link Configuration
2: Display Configured Link Configuration
3: Configure Link Configuration
4: Save changes and reset HBA (if necessary)
Display Active Link Configuration
Select this option to view the active link
configuration. For example: