Qlogic 3200 Series User Manual - Adapter Alias (-Ha)
10–Fibre Channel Interactive Commands
Adapter Alias (-ha)
SN0054667-00 G
10-7
Adapter Alias (-ha)
2. Adapter Configuration2. Fibre Channel Adapter1. Adapter Alias
From the Fibre Channel Adapter Configuration menu, select the Adapter Alias
option. From the adapter menu, select an adapter to view or change its adapter
alias. The adapter’s identifying information is displayed followed by a prompt
identifying the current adapter alias in brackets. To change the adapter alias, enter
the new value and press ENTER. (If you do not want to change the alias, just
press ENTER.) The following is an example of changing the adapter alias from 0
to 1:
Fibre Channel Adapter Configuration
1: HBA Model: QLE2562 SN: GFC0819H89653
Port 1 WWPN: 21-00-00-1B-32-0C-95-0C Link Down
Port 2 WWPN: 21-01-00-1B-32-2C-95-0C Link Down
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
=======================================================
HBA Model : QLE2562
HBA Desc. : QLE2562 PCI Express to 8Gb FC Dual Channel
HBA SN : GFC0819H89653
HBA Alias : 0
=======================================================
HBA Alias [0]: 1
Update completed. Changes have been saved to HBA WWNN 20-00-00-1B-32-0C-95-0C!
Hit
NOTE
The options supported and available on the Fibre Channel Adapter
Configuration menu depend on the drivers and operating system detected.
You may not see all of the options listed above and described in this section
of the guide.